HAWKEYE SYSTEMS
Payroll from Timesheets: A Field-Ready Process
How to turn timesheets into accurate payroll: what to capture, how to approve hours, handle overtime and corrections, and keep records that hold up.
Plan a walkthroughTo run payroll from timesheets, capture hours with the job, site and pay type attached. Have a supervisor approve them before a set cutoff, and move only approved, locked records into payroll. Keep every later change in a visible audit trail. Most payroll errors start earlier than the payroll run: a missing project code, an unapproved overtime entry, or hours estimated from memory on Friday afternoon.
This guide walks through that process step by step. It is written for construction, utilities and field service teams, where crews work across several sites and the people who approve hours are rarely in the same room as the people who pay them.
Hefieldops
Connect Field Records to Office Review
Hefieldops connects field activity with office management, helping teams document site work for efficient review and billing processes.
TL;DR
- Any timekeeping method is acceptable under U.S. federal guidance as long as the final record is complete and accurate. What matters is that the record is complete and traceable.
- Capture the job, site, pay type and overtime flag at the moment hours are logged, not afterward.
- Approve before you export. Send incomplete rows to an exceptions list, then lock the approved file at cutoff.
- Never edit approved time silently. Record who changed what, when and why.
- Keep payroll and wage-computation records for the periods federal rules require, and check state rules too.
Table of Contents
- What a payroll-ready timesheet contains
- What U.S. rules require you to keep
- From raw hours to payroll: five steps
- Overtime and mixed pay rates
- Corrections without losing the trail
- Where spreadsheets and email break down
- Perspective
- See how Hawkeye connects field hours to payroll
- Reducing late, missing and inaccurate timesheets
- FAQ
- Sources
What a payroll-ready timesheet contains
A timesheet that only says “40 hours” cannot produce a correct paycheck or a correct invoice. Payroll needs enough detail to calculate pay, and the office needs enough detail to bill and cost the work.
At a minimum, each entry should carry:
- Who: employee name and ID, plus the supervisor who will approve.
- When: the date and the start and end times, not just a daily total.
- Where and what: the project or job code, the site, and a short description of the work.
- Pay type: regular, overtime, double time where it applies, and unpaid or non-worked time such as breaks or leave.
- Sign-off: an employee confirmation and a manager approval.
This lines up with what common timesheet templates recommend: name, ID, department and supervisor, start and end times, regular and overtime hours, and a notes field for project codes or work descriptions. Separating pay types matters just as much. A payroll-oriented template should distinguish regular, overtime, double-time and unpaid time, and keep billable apart from non-billable hours.
Split time across jobs on separate rows
When a crew member works on two projects in one shift, do not log one block and estimate a percentage later. Enter two rows, each with its own required job code. That keeps traceability for job costing and billing, and it lets payroll, accounting and project managers all read the same record. Our guide to job cost allocation in construction shows how those rows flow into cost reports.
What U.S. rules require you to keep
For non-exempt workers covered by the Fair Labor Standards Act (FLSA), the Department of Labor lists what employers must record. According to DOL Fact Sheet #21, that includes:
- full name and Social Security number, address, and birth date if the worker is under 19
- sex and occupation
- the day and time the workweek begins
- hours worked each day and each week
- the basis of pay and the regular hourly rate
- straight-time and overtime earnings
- additions to or deductions from wages
- total wages paid each pay period, the payment date and the pay period covered
The same fact sheet sets retention periods: payroll records for at least three years, and supporting wage-computation records such as time cards and wage-rate tables for two years. The DOL also says employers may choose their own timekeeping method, whether time clocks, supervisor timekeeping or employee self-reporting, as long as the final record is complete and accurate.
That last point is the practical one. The law does not require a particular app or form. It requires that the record be right and that you can produce it.
State rules can add to this, and they differ. Wage and hour agencies in your state, and the DOL’s Wage and Hour Division, are the places to confirm what applies to your workers. Rules outside the U.S. differ again. For example, if you have crews in Bulgaria, the overtime rules in Bulgaria cover limits, pay premiums and records that follow a different framework from the FLSA.
From raw hours to payroll: five steps
1. Capture time close to the work
The closer the entry is to the actual work, the fewer disputes you get. Mobile entry from the site, with the job code chosen from a list rather than typed, removes most of the guesswork. Entries made from memory at the end of the week are the source of most rounding arguments and missing codes.
2. Set a submission deadline and a reporting period
Pick a fixed cutoff, such as end of day Monday for the prior workweek, and write it down. Use reminders for people who have not submitted. Reject incomplete timesheets with a short explanation instead of fixing them quietly, so the cause gets corrected at the source. A timesheet policy checklist suggests the same pattern: a deadline, reminders, mobile access and rejection with a reason.
3. Run the approval process
Timesheet approval is the step where a supervisor confirms that the hours, site, overtime and leave on a submitted sheet are what happened. The supervisor who directed the crew is the right first approver, because they know who was on site. A payroll or billing specialist then reviews exceptions rather than re-reading every line.
A workable sequence:
- The employee submits by the cutoff.
- The supervisor checks hours against the schedule and the day’s work record, looking for missing entries, unexplained overtime and mismatched job codes.
- The supervisor approves, or rejects with a note.
- Payroll reviews only flagged items: overtime beyond a threshold, edits, or hours without a matching job.
Keep controls purposeful. Approval checks should exist to verify job allocation or clear pay-impacting exceptions, not to stop the whole run over a minor data issue. A missing note on a clearly valid shift should not hold up forty paychecks.
4. Map approved time to pay categories and lock it
Before import, reject rows that are incomplete and place them on an exceptions list. Map approved time to your payroll categories: regular, overtime, premium rates, leave. Then lock the file at cutoff and validate it before it is imported. A practical conversion checklist describes the same order: supervisor approval of work, site, overtime and leave first, then exceptions, mapping, lock and validation.
It also helps to keep three states of data distinct: raw time events as captured, rule-based draft timesheets, and approved, locked records for payroll. A layered workflow like this means nobody overwrites the original capture while cleaning up.
5. Reconcile after the run
Compare payroll totals to approved hours and to the labor distributed across jobs. Timekeeping systems should trace labor to cost objectives and reconcile labor distribution to cost records, with corrections and labor transfers documented and approved. Small differences found now are cheap. The same differences found in a pay application or an audit are not.
Overtime and mixed pay rates
Overtime is where timesheet-to-payroll errors cost the most, because one wrong flag changes the rate on every affected hour. Three habits help:
- Flag overtime eligibility on the worker record, not on each timesheet, so it is applied consistently.
- Show hours by rate. Guidance from the UK’s Acas on payslips says that when variable hours are paid at different rates, employers should break down hours at each rate. It is UK guidance, but it describes a good habit anywhere: the worker should be able to see how pay was built.
- Require a supervisor approval on overtime before it reaches payroll, not after.
Projects with prevailing wage requirements add another layer, because the same worker may be paid at different rates on different jobs. Our page on certified payroll reporting explains how field records support that reporting.
Corrections without losing the trail
Corrections are inevitable. The risk is not that a record changes but that nobody can say how. Set a correction window, require a reason for every edit, and limit who can reopen an approved timesheet to authorized approvers. After payroll is finalized, use a formal adjustment in the next period instead of rewriting history, as the policy checklist above recommends.
Each adjustment should show what was captured, what changed, who changed it, when and why. Audit-trail guidance says the same: approved records are locked for export, and later changes stay visible.
Where spreadsheets and email break down
Many small teams start with emailed timesheets and a spreadsheet of active employees. It works at ten people. Past that, field teams hit the same problems:
- Hours arrive in different formats, so someone retypes them.
- Job codes are free text, so the same job appears under three names.
- Approvals live in email threads, not on the record.
- Edits are invisible once someone overwrites a cell.
None of that is a reason to rush. It is a sign to decide which of the five steps above you want a system to enforce for you. For a closer look at what to record on site and which format fits, see our guide to construction timesheets, and for payroll specifically, what to automate and what to check.
Perspective
Payroll is the last handoff in a chain that starts at assignment. If the crew, the job code and the equipment were clear when the work was assigned, the timesheet nearly writes itself. If they were not, no approval step can fully repair it.
That is why we build Hawkeye Field Ops around a connected record: configurable workflows capture operational context from assignment through billing, so each handoff is clear and traceable. Hours, daily work records, field tickets and labor and equipment tracking sit together, and the office reviews one record instead of reconciling four.
Our approach is to prepare billing and payroll documents from that record, so the supervisor’s approval in the field is the same approval the office relies on. Mobile site monitoring adds situational awareness on remote sites, and workforce readiness tracking helps keep the right trained people assigned to the right work.
Client
See how Hawkeye connects field hours to payroll
If your hours still travel by email, text and spreadsheet, Hawkeye Field Ops brings crew scheduling, job planning, labor and equipment tracking, daily work records and field ticketing into one record, with billing and payroll documents prepared from it. Explore the Hawkeye Field Ops platform, or see how it handles people and payroll for field teams.
Teams that want to see it on their own workflow can start with a product walkthrough from the Hawkeye home page.
Reducing late, missing and inaccurate timesheets
Late timesheets are usually a process problem, not a people problem. A few fixes that work in the field:
- Make entry easy. Mobile access on the site beats a paper form in a truck.
- Use pick-lists for jobs and cost codes so typos cannot happen.
- Remind before the deadline, not after it.
- Show supervisors a dashboard of who has and has not submitted, so chasing takes minutes.
- Review exceptions weekly, not at month end, so patterns such as repeated missing codes get coached.
Real-time field data helps here because it shows readiness before payday: who is assigned, who is on site and what is still open. See our guide to construction labor tracking for how that visibility prevents payroll errors.
FAQ
What is the timesheet approval process?
It is the review step between a worker submitting hours and payroll using them. A supervisor who knows the work confirms hours, site, overtime and leave, then approves or rejects with a note. Only approved time is exported to payroll.
Who should approve timesheets?
The direct supervisor or foreman is usually the best first approver, because they know who worked where. Payroll or billing staff then review exceptions and totals. Limit who can reopen an approved sheet to named approvers.
How long should we keep timesheets and payroll records?
For FLSA-covered employers, DOL Fact Sheet #21 calls for payroll records for at least three years and time cards and similar wage-computation records for two years. States may require longer, so confirm with your state labor agency.
Do I need special software to run payroll from timesheets?
No. The DOL lets employers choose their timekeeping method if the record is complete and accurate. Software helps when you need job codes, approvals, audit trails and exports to work consistently across many crews.
What should happen when a timesheet needs correcting after payroll?
Make a formal adjustment with a reason, the approver and the date, and apply it in the next pay period. Do not overwrite the original entry. The change should stay visible in the audit trail.
Sources
- Recordkeeping, U.S. Department of Labor
- Fact Sheet #21: Recordkeeping Requirements under the FLSA, U.S. Department of Labor
- Payslips, Acas
- GovCon: Timekeeping and LCAT, Public Contracting Institute
- Free monthly timesheet template
- Timesheet template for payroll reports and dashboards
- How to design an internal timesheet and time-capture system
- How to automate timesheet capture without creating payroll problems
- How to convert timesheets into payroll
- How to create a timesheet policy
Recommended
START WITH YOUR WORKFLOW
See your operations in action.
Walk through the handoffs that slow your team down—and see where a connected record can help.